|
Product Detail :
|
MSDAC .
* Multi section Digital Axle Counter (MSDAC) supply, design, installation, testing and com
missioning of multi section digital axle counter (MSDAC) complete system as per RDSO Specification N
o. RDSO/SPN/176/2013 version 3 with latest amendments or latest. Suitable for commissioning of yard
/Auto Section/dual detection (DCTC/AFTC with MSDAC). MSDAC should have facility to reset track secti
ons. Design of axle counter circuit indoor installation testing and commissioning of multi section digital
axle counter (per unit), supply of essential 10% spares covering all types of cards, wheel sensors for M
SDAC Supply of Diagnostic system for Remote diagnostics. Tool set for wheel sensor mounting and ma
intenance of MSDAC consisting of torque wrench, ratchet, testing plate, measuring tape, screw driver,
gloves and multimeter fluke 115 (1 Nos. per 14 DP). NOTE 1. If any housing is required to keep outdoo
r equipment, it has to be supplied with the equipment with no extra cost. 2. Maintenance free earthing
(supply and installation) for track device/mushroom housing etc to be done by the contractor, If requir
ed by system design. No extra cost/payment will be made by Railway. 3. Automatic resetting facilities
through hardware/software for auto resetting to be provided by contractor by his own materials. For th
is no extra cost/payment will be made by Railways. 4. MSDAC system networking to be done with cent
ral control room. Required hardware PCI network equipment to be provided by the contractor. No extr
a cost/payment will be made for this by the Railway. Point EI channels/media will be provided by Railw
ay for this purpose from nearest Railway station. 5. All other hardware like TPR, extra card to make du
al DP, modem, ethernet switches etc if required for commissioning and final track section pick up will b
e supplied by contractor. No extra payment will be made by the Railways. 6. Separate evaluator for UP
and Down line to be provided at Station/RH as decided by Railway Site Engineer. For the communicati
on between evaluator to evaluator (RH to station) Quad/OFC Link (dark fiber) will be provided by Railw
ay. Any other networking equipment required will be supplied by contractor at no extra cost. 7. Manua
l resetting through reset box at station to be provided as per requirement. (Requirement 3 DP, 1 track
section for station). [ Warranty Period 30 Months after the date of delivery ]
[Quantity Tolerance (+/-) 5 %age , Item Category Normal , Total PO value variation Permitt
ed Max 8 lacs ] ]
|